Problem z kodem DigiSpark 16,5mhz

Mrpatryk · Sierpień 11, 2019

#include <DigiCDC.h>
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_Sensor.h>
#include "Adafruit_BME680.h"
#define SEALEVELPRESSURE_HPA (1013.25)
Adafruit_BME680 bme; // I2C
void setup() {
  SerialUSB.begin();

 
  SerialUSB.println(F("BME680 test"));
  

  if (!bme.begin(0x76)) 
  {
    SerialUSB.println("Could not find a valid BME680 sensor, check wiring!");
    while (1);
  }
 
 
 bme.setTemperatureOversampling(BME680_OS_8X);
 bme.setHumidityOversampling(BME680_OS_2X);
 bme.setPressureOversampling(BME680_OS_4X);
  bme.setIIRFilterSize(BME680_FILTER_SIZE_3);
  bme.setGasHeater(320, 150); 
}
 
void loop() {
 
  if (! bme.performReading()) 
  {
    SerialUSB.println("Failed to perform reading :(");
    return;
  }
  SerialUSB.print("Temperature = ");
  SerialUSB.print(bme.temperature);
  SerialUSB.println(" *C");
 


  SerialUSB.print("Pressure = ");
  SerialUSB.print(bme.pressure / 100.0);
  SerialUSB.println(" hPa");
 
  SerialUSB.print("Humidity = ");
  SerialUSB.print(bme.humidity);
  SerialUSB.println(" %");
 
  SerialUSB.print("Gas = ");
  SerialUSB.print(bme.gas_resistance / 1000.0);
  SerialUSB.println(" KOhms");
 

 
  SerialUSB.print("Approx. Altitude = ");
  SerialUSB.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
  SerialUSB.println(" m");
 
 SerialUSB.println();
 


  SerialUSB.delay(2000);
}

Otrzymuje taki oto bład 😄

Warning: Board tiny:tiny:attiny85at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY85AT1
Warning: Board tiny:tiny:attiny24at16 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY24AT16
Warning: Board tiny:tiny:attiny84at16 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY84AT16
Warning: Board tiny:tiny:attiny4313at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY4313AT8
Warning: Board tiny:tiny:attiny85at16p doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY85AT16P
Warning: Board tiny:tiny:attiny44at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY44AT8
Warning: Board tiny:tiny:attiny2313at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY2313AT8
Warning: Board tiny:tiny:attiny45at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY45AT1
Warning: Board tiny:tiny:attiny4313at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY4313AT1
Warning: Board tiny:tiny:attiny84at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY84AT8
Warning: Board tiny:tiny:attiny85at128 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY85AT128
Warning: Board tiny:tiny:attiny84at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY84AT1
Warning: Board tiny:tiny:attiny25at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY25AT8
Warning: Board tiny:tiny:attiny44at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY44AT1
Warning: Board tiny:tiny:attiny2313at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY2313AT1
Warning: Board tiny:tiny:attiny85at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY85AT8
Warning: Board tiny:tiny:attiny45at8 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY45AT8
Warning: Board tiny:tiny:attiny25at1 doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY25AT1
Warning: Board tiny:tiny:attiny85at16e doesn't define a 'build.board' preference. Auto-set to: TINY_ATTINY85AT16E
In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In member function 'void SPISettings::init_AlwaysInline(uint32_t, uint8_t, uint8_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:146:16: error: 'SPE' was not declared in this scope

     spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |

                ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:146:27: error: 'MSTR' was not declared in this scope

     spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |

                           ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:146:65: error: 'DORD' was not declared in this scope

     spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |

                                                                 ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::beginTransaction(SPISettings)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:203:5: error: 'SPCR' was not declared in this scope

     SPCR = settings.spcr;

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:204:5: error: 'SPSR' was not declared in this scope

     SPSR = settings.spsr;

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static uint8_t SPIClass::transfer(uint8_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:209:5: error: 'SPDR' was not declared in this scope

     SPDR = data;

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:217:14: error: 'SPSR' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ; // wait

              ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:217:25: error: 'SPIF' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ; // wait

                         ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static uint16_t SPIClass::transfer16(uint16_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:223:11: error: 'SPCR' was not declared in this scope

     if (!(SPCR & _BV(DORD))) {

           ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:223:22: error: 'DORD' was not declared in this scope

     if (!(SPCR & _BV(DORD))) {

                      ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:224:7: error: 'SPDR' was not declared in this scope

       SPDR = in.msb;

       ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:226:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:226:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:230:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:230:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:233:7: error: 'SPDR' was not declared in this scope

       SPDR = in.lsb;

       ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:235:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:235:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:239:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:239:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::transfer(void*, size_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:247:5: error: 'SPDR' was not declared in this scope

     SPDR = *p;

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:250:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:250:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:255:14: error: 'SPSR' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ;

              ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:255:25: error: 'SPIF' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ;

                         ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::setBitOrder(uint8_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:292:31: error: 'SPCR' was not declared in this scope

     if (bitOrder == LSBFIRST) SPCR |= _BV(DORD);

                               ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:292:43: error: 'DORD' was not declared in this scope

     if (bitOrder == LSBFIRST) SPCR |= _BV(DORD);

                                           ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:293:10: error: 'SPCR' was not declared in this scope

     else SPCR &= ~(_BV(DORD));

          ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:293:24: error: 'DORD' was not declared in this scope

     else SPCR &= ~(_BV(DORD));

                        ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::setDataMode(uint8_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:298:5: error: 'SPCR' was not declared in this scope

     SPCR = (SPCR & ~SPI_MODE_MASK) | dataMode;

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::setClockDivider(uint8_t)':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:303:5: error: 'SPCR' was not declared in this scope

     SPCR = (SPCR & ~SPI_CLOCK_MASK) | (clockDiv & SPI_CLOCK_MASK);

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:304:5: error: 'SPSR' was not declared in this scope

     SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((clockDiv >> 2) & SPI_2XCLOCK_MASK);

     ^

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::attachInterrupt()':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:309:42: error: 'SPCR' was not declared in this scope

   inline static void attachInterrupt() { SPCR |= _BV(SPIE); }

                                          ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:309:54: error: 'SPIE' was not declared in this scope

   inline static void attachInterrupt() { SPCR |= _BV(SPIE); }

                                                      ^

In file included from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:4:0:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h: In static member function 'static void SPIClass::detachInterrupt()':

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:310:42: error: 'SPCR' was not declared in this scope

   inline static void detachInterrupt() { SPCR &= ~_BV(SPIE); }

                                          ^

In file included from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\io.h:99:0,

                 from c:\users\patryk\appdata\local\arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5\avr\include\avr\interrupt.h:38,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/WProgram.h:8,

                 from C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\cores\tiny/Arduino.h:4,

                 from sketch\sketch_aug11a.ino.cpp:1:

C:\Users\Patryk\AppData\Local\Arduino15\packages\digistump\hardware\avr\1.6.7\libraries\SPI/SPI.h:310:55: error: 'SPIE' was not declared in this scope

   inline static void detachInterrupt() { SPCR &= ~_BV(SPIE); }

                                                       ^

In file included from C:\Users\Patryk\Documents\Arduino\libraries\Adafruit_BME680_Library/bme680.h:63:0,

                 from C:\Users\Patryk\Documents\Arduino\libraries\Adafruit_BME680_Library/Adafruit_BME680.h:35,

                 from C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:6:

C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino: In function 'void setup()':

C:\Users\Patryk\Documents\Arduino\libraries\Adafruit_BME680_Library/bme680_defs.h:74:31: error: 'U8_C' was not declared in this scope

 #define UINT8_C(x)      U8_C(x)

                               ^

C:\Users\Patryk\Documents\Arduino\libraries\Adafruit_BME680_Library/bme680_defs.h:187:23: note: in expansion of macro 'UINT8_C'

 #define BME680_OS_8X  UINT8_C(4)

                       ^

C:\Users\Patryk\Documents\Arduino\sketch_aug11a\sketch_aug11a.ino:23:33: note: in expansion of macro 'BME680_OS_8X'

  bme.setTemperatureOversampling(BME680_OS_8X);

                                 ^

exit status 1
Błąd kompilacji dla płytki Digispark (Default - 16.5mhz).

Ktoś ma jakiś pomysł? Pewnie czegoś brakuje w bibliotekach ;/

Problem z kodem DigiSpark 16,5mhz

Pomocna odpowiedź

Mrpatryk

Link do komentarza

Share on other sites

Dołącz do dyskusji, napisz odpowiedź!

Quizy

Najnowsze posty w innych tematach

Wejścia cyfrowe - jak płynie prąd? 1 2

problem z grą na mit app inventor

(Kolejny) Generator wysokiego napięcia

Sprawdzenie płytki PCB i zastąpienie przekaźników elementami półprzewodnikowymi 1 2

Własny protokół dwużyłowy z jedną linią danych - Implementacja programowa. 1 2

Inne